PREVENT wheel disc lacquer aerosol

Product code: TE01470

Packaging: 400 ml

Package: 5pcs.

This product is suitable for the protective lacquering of wheel rims coated with PREVENT wheel rim paint, hubcaps, other metals, wood, glass and certain plastic surfaces.

Using the lacquer, fuel-resistant, brilliant, hard, attractive and durable coating can be created, which is heat-resistant up to 100 °C.

It dries quickly, has good adhesion properties and provides long-term weather-resistance.

It is not recommended for the painting of surfaces which are permanently in contact with fuel. For plastics and painted surfaces, compatibility test should be carried out!

The content of the aerosol is enough to coat approx. 2 - 2.5 m2 surface in one layer.

Other product info

ADVICE FOR PAINTING, AEROSOL TECHNIQUES

The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

Keep up the good work!

The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

Using instructions

The ideal temperature for use is 20-25°C (68-77°F). Only apply on dry and grease, oil, dust and rust-free surface.
Before lacquering, polish the surface flat.
Shake the bottle for 1 minute after the start of the movement of the balls.
By keeping the bottle vertically, from a distance of about 20 cm (8 inch), spray evenly and finely the prepared surface which can be re-coated after a drying period of about 15 minutes.

In case of the incidental clogging of the valve, operate the bottle by turning the nozzle.
After use, operate the bottle upside down for 2-3 seconds.

Comments

If you would like to write a comment please sign in!

Questions, answers

If you want to write a question please sign in!

Car care

PREVENT wheel disc lacquer aerosol

Other product info

Using instructions

The ideal temperature for use is 20-25°C (68-77°F). Only apply on dry and grease, oil, dust and rust-free surface.

Before lacquering, polish the surface flat.

Shake the bottle for 1 minute after the start of the movement of the balls.

By keeping the bottle vertically, from a distance of about 20 cm (8 inch), spray evenly and finely the prepared surface which can be re-coated after a drying period of about 15 minutes.

After use, operate the bottle upside down for 2-3 seconds.

Comments

Questions, answers

Similar products