PREVENT bumper paint black aerosol

Colour:

Product code: TE01713

Packaging:

Package: 5pcs.

The PREVENT Bumper paint is suitable for painting the off-colour, damaged plastic bumper of vehicles, and also the metal, wood, and other plastic surfaces, used in- and outdoors.

With the use of the PREVENT Bumper paint, a mat, grainy, rugged coating can be created. The use of primer paint is not necessary!

The paint dries fast, adheres good to the surface, gives a perfect cover and forms a surface resistant to weather, detergents, mechanical effects.

The content is adequate for the painting of a 2,5 m2 surface, in one layer.

Other product info

ADVICE FOR PAINTING, AEROSOL TECHNIQUES

The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

Keep up the good work!

The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

Using instructions

The paint shall be applied on a cleaned and dry surface sanded previously with a P220 emery, preferably at 20-25 °C (68-77°F)!
Shake the bottle for 3 minutes after the start of the movement of the balls.
Protect the surfaces not to be painted against painting e.g. by covering.
Spray the surface evenly and softly, which can be resprayed after 10 minutes of drying time.
Avoid the too thick layer to prevent scaling.

The incidental paint contaminations must be removed by acetone. In case of the clogging of the valve, operate the bottle by turning the nozzle.
After use, operate the bottle upside down for 2-3 seconds.

Comments

If you would like to write a comment please sign in!

Questions, answers

If you want to write a question please sign in!

Car care

PREVENT bumper paint black aerosol

Other product info

Using instructions

The paint shall be applied on a cleaned and dry surface sanded previously with a P220 emery, preferably at 20-25 °C (68-77°F)!

Shake the bottle for 3 minutes after the start of the movement of the balls.

Protect the surfaces not to be painted against painting e.g. by covering.

Spray the surface evenly and softly, which can be resprayed after 10 minutes of drying time.

Avoid the too thick layer to prevent scaling.

After use, operate the bottle upside down for 2-3 seconds.

Comments

Questions, answers

Similar products