Hobby, DIY paint aerosols

TE02694 TE02695 TE02696 TE02697 TE02698
TE02694
TE02695
TE02696
TE02697
TE02698

MAESTRO Super Plastic paint black

Colour:
Product code: TE02694
Packaging:
Package: 6pcs.

Manufactured on the basis of a Swiss patent, SUPER PLASTIC is a plastic paint of quite new type for solvent-resistant surfaces. 

It can be applied without using any primer. Ideal for decorating, colouring plastic objects, parts or as a protective coating. 

Provides flexible coating of good covering capacity, quick drying and excellent adhesion. 

The product is suitable for painting PET, polypropylene, ABS, polycarbonate, plexiglass (PMMA), hard PVC and artificial resin surfaces. The set coating does not yellow; it is antistatic, weather-proof, protects from the effects of UV radiation, increases the life of the plastic elements and hinder the plasticizer from further evaporation. 

The coating can already be fingered after 3 hours from the spraying and the full setting takes place in ca. 24 hours.

    Other product info

    ADVICE FOR PAINTING, AEROSOL TECHNIQUES

    The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

    The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

    Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

    The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

    In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

    Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

    Keep up the good work!

    The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

    Using instructions

    • Apply the paint on a dry, silicone and dust-free surface at 20-25°C if possible.


    • It is necessary to degrease the surfaces previously (e.g. by using ethyl alcohol).


    • Shake the bottle for 1 minute from the start of the balls.


    • Spray the surface uniformly, lightly from 10-20 cm distance in at least two layers.


    • When applying it, be careful to spray only one light layer at a time on the surface by means of cross spraying. Allow min. 10 minutes’ drying time between the layers.


    • In case of any possible valve clogging or when you finish painting, flush the nozzle with the propellant: operate the bottle with the nozzle facing downwards for 2-3 seconds, while in case of valve clogging, operate the aerosol with the nozzle turned off. 


    Comments

If you would like to write a comment please sign in!
Loading

    Questions, answers

    If you want to write a question please sign in!
    Loading