Hobby, DIY paint aerosols

TE02685 TE02686 TE02683 TE02684
TE02685
TE02686
TE02683
TE02684

MAESTRO wood lasur paint aerosol colourless

Colour:
Product code: TE02685
Packaging:
Package: 5pcs.

Water-based wood transparent paint which is suitable for quick decoration, colouring of wooden surfaces or as a protective coating both indoor and outdoor. It provides coating of good opacity, quick drying and excellent adhesion, while emphasising the original, natural grain of wood.  It can be used excellently for painting wooden garden chairs, tables, trellises, flower containers, wooden window frames, wooden ornaments, etc.  The layers will fully dry and reach maximum hardness in about 18-24 hours.

    Other product info

    ADVICE FOR PAINTING, AEROSOL TECHNIQUES

    The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

    The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

    Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

    The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

    In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

    Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

    Keep up the good work!

    The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

    Using instructions

    • Apply it at 20-25°C if possible. Prior to painting, it is recommended that you grind the surface with P180 grinding paper and dedust. 

      Shake the can for 1 minute from the start of the balls. 

    • Spray the surface from 20-25 cm distance evenly in a thin layer. 


    • When applying it, be careful to spray only one thin layer on the surface at the same time by cross-spraying. 


    • After drying, it is necessary to slightly grind (and dedust) the surface again for reaching perfect result. Then you can apply the next layer. 

      The depth of the final shade greatly depends on the type and basic colour of the wood as well as the number of the layers applied.

    •  

      In case of any possible clogging of valve as well as after completion of painting, flush over the spray nozzle with the propellant: operate the aerosol can upside down for 2-3 seconds; in case of valve clogging, operate the aerosol can with the spray nozzle being turned off.


    Comments

If you would like to write a comment please sign in!
Loading

    Questions, answers

    If you want to write a question please sign in!
    Loading