TE02100 TE02101 TE02102 TE02103 TE02416
TE02100
TE02101
TE02102
TE02103
TE02416

MAESTRO signing paint aerosol yellow 1003

Colour:
Product code: TE02100
Packaging:
Package: 5pcs.

The aerosol is suitable for making well-visible outdoor or indoor marks on roads, trees, columns, industrial floor, parking places, playgrounds, sports fields etc. It ensures a weather-proof, hard but flexible coating of good hiding power and excellent adhesion. 

The paint adheres well to various surfaces (concrete, asphalt, metal, wood, glass etc.), even if they are slightly wet. 

In case of plastics, compatibility test shall be performed. It does not flow even on vertical surfaces.

    Other product info

    ADVICE FOR PAINTING, AEROSOL TECHNIQUES

    The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

    The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

    Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

    The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

    In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

    Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

    Keep up the good work!

    The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

    Using instructions

    • The ideal temperature for use is 20-25°C (68-77°F). Never use below 10°C (50°F). 


    • Shake the bottle for 1 minute after the start of the movement of the balls. 


    • By keeping the bottle upside down, spray the surface to be marked uniformly from a distance of 20-40 cm. 


    • The width of the stripe to be painted can be modified by the distance of the nozzle from the surface as well.


    •  It can be used by a marker trolley and a marking pistol as well. 

      In case of the incidental clogging of the valve, operate the bottle by turning the nozzle. 

    • After use, operate the bottle upside down for 2-3 seconds.


    Comments

If you would like to write a comment please sign in!
Loading

    Questions, answers

    If you want to write a question please sign in!
    Loading